 Air Filter-Regulator-Lubricator |
|
| |
|
 |
| FEATURES |
- Olympian Plus plug in design
- High Efficiency water and particle removal
- Quick release bayonet bowls
- High visibility prismatic sight glass*
- Push to lock adjusting knob with tamper resistant option
- Constant oil density output with varying flow
|
|
| |
|
| SPECIFICATION |
|
Parameters |
Specifications |
Medium |
Compressed Air |
Maximum pressure |
17 bar metal bowl
10 bar guarded transparent bowl |
| Operating Temperature |
-20°C* to +80°C metal bowl
-20°C *to +50°C guarded transparent bowl
* Consult our technical service for use below +2°C |
| Gauge Ports |
R c
1 .8 |
Maximum flow with 10 bar inlet pressure, 6,3 bar outlet pressure and pressure drop of 1 bar |
37 dm
3/s
Filter-Regulator |
| Filter Element |
40 µm nominal standard
5 µm nominal optional |
| Recommended Regulating Pressure Ranges |
0,3 10 bar standard
0,3 4 bar optional
2 16 bar optional
Can be adjusted to zero bar outlet and, generally, to pressures in excess of those specified Lubricator |
| Start point at 6,3 bar |
1,5 dm
3/s |
| Nominal Bowl capacity |
0,2 litres standard |
| Materials |
Aluminium bowl standard, guarded polycarbonate bowl optional. Zinc alloy body and yoke. Synthetic rubber elastomeric materials. Grilamid prismatic sight glass lens standard. Pyrex sight glass optional for metal bowl. |
| Filter-Regulator |
Aluminium bonnet. Sintered plastic filter element. |
| Lubricator |
Polycarbonate sight dome. |
|
 |
Quick release bayonet bowl
- Lubricator flow sensor provides a nearly constant oil/air ratio over a wide range of air flows
- All around (360°) visibility of the lubricator sight-feed dome simplifies installation and adjustment
- Regulator balanced valve minimizes effect of variation in the inlet pressure on the outlet pressure
Use Micro mist models in applications containing one or more points of lubrication.
Use Oil-Fog models to lubricate a single tool, cylinder, or other air driven device. |
| a |
|
|
Parameters |
Specifications |
Fluid |
Compressed Air |
Maximum pressure |
Transparent bowl: 10 bar (150 psig)
Metal bowl:
Manual or semi automatic drain: 17 bar (250 psig)
Automatic drain: 10 bar (150 psig) |
| Operating temperature* |
Transparent bowl: -20° to +50°C (0° to +125°F)
Metal bowl: -20° to +65°C (0° to +150°F)
* Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F). |
| Particle removal |
5 µm, 25 µm, or 40 µm filter element |
Manual drain connection |
1/8 " |
| Semi automatic drain connection |
Push on 8 mm (5/16 ") ID tube |
| Semi automatic drain operating conditions (pressure operated) |
Bowl pressure required to close drain: Greater than 0,1 bar (1.5 psig)
Bowl pressure required to open drain: Less than 0,1 bar (1.5 psig)
Minimum air flow required to close drain: 0,5 dm 3 /s (1 scfm)
Manual operation: Lift stem to drain bowl |
| Nominal bowl size |
Short bowl: 56 ml (1.9 fluid ounce)
Long bowl: 65 ml (2.2 fluid ounce) |
| Gauge ports |
1/8 PTF with PTF main ports
Rc 1/8 with ISO Rc and ISO G main ports |
| Materials |
Body: Zinc
Bonnet: Acetal
Filter/Regulator valve: Brass
Bowl:
Transparent: Polycarbonate
Transparent with guard: Polycarbonate,
zinc guard
Metal: Zinc
Metal bowl liquid level indicator lens:
Transparent nylon
Sight-Feed dome: Transparent nylon
Element: Sintered polypropylen
Elastomers: Neoprene, nitrile, and Geolast® |
|
| |
|
| |
|
